Xerox WORKCENTRE 3210 User Manual page 101

N
: If your printer is not already connected to the computer, the
OTE
following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click Next, and No
on the following screen. Then the installation will start and a test page
will not be printed at the end of the installation.
• The installation window that appears in this User's Guide may
differ depending on the printer and interface in use.
5
After the installation is finished, a window asking you to print a test
page appears. If you choose to print a test page, select the
checkbox and click Next.
Otherwise, just click Next and skip to step 7.
6
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
Click Finish.
N : After setup is complete, if your printer driver doesn't work
OTE
properly, reinstall the printer driver. See "Reinstalling Printer Software"
on page 9.
Custom Installation
You can choose individual components to install.
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
5
Installing Printer Software in Windows
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the User Account Control window.
3
Click Install Software.
4
Select Custom installation. Click Next.
5
Select your printer and click Next.