Initialize/Delete Data; Software Option; Fax Settings - Xerox Copycentre C118 User Manual

9 Setups
Memory - Select this to perform spool processing. This uses the memory as the
receive buffer for spool processing. If you select this option, specify the receive
buffer memory capacity for spool processing within 0.5 to 32 MB in 0.25 MB
increments.

Initialize/Delete Data

Use this feature to initialize the default values or print meter recorded in the NVM
memory, or delete the data such as the form registered in the machine.
1.
Select the required option by selecting
[ ] or [ ] using the <Select> button.
2.
Press the <Enter> button.
3.
Perform the necessary operations.
4.
Press the <Enter> button. The selected option is indicated by an asterisk (*).
NVM
Initialize the NVM memory. The NVM memory is a non-volatile memory that allows the
settings of the machine to be retained even when power is off. When initializing the
NVM memory, the specified value for each item resets to the factory default values,
clearing all user settings. Press the <Enter> button to initialize.
Print Meter
Initialize the data for the print meter reports. When initializing the data of the print meter,
the value of the meter resets to 0. Press the <Enter> button to initialize.

Software Option

Use this feature to activate the optional Scan to E-mail software feature. Enter the
password for the Scan to E-mail feature. The password is on the inside cover of the
Scan to E-mail Instructions. For more information on activating this feature, refer to the
Scan to E-mail Quick Setup Guide.

Fax Settings

This screen allows you to configure and change the default settings for using the fax
features. For more information, refer to the following.
Date/Time – page 147
Daylight Savings – page 147
Fax Send Settings – page 148
Receive Settings – page 149
146 Xerox CopyCentre/WorkCentre 118 User Guide