Millimeters/Inches; Ab Series/Inches; Auditron Administration - Xerox Copycentre C118 User Manual

5.
Press the <Enter> button. When the entered code was not correct, re-enter the
appropriate code again.
6.
Select [OK] to change the country code.
7.
Reboot the machine to activate the settings.

Millimeters/Inches

Use this feature to change the unit of paper size displayed in the third screen, [Variable
Size] screen, of the [Paper Size] screens. For more information, refer to [Paper Size]
screen in the Copy chapter on page 55.
Millimeters
Selects to display the millimeters.
Inches
Selects to display the inches.

AB Series/Inches

Use this feature to change the order of the first two screens, the AB Series screen and
the Inches screen, of the [Paper Size] screens. For more information, refer to [Paper
Size] screen in the Copy chapter on page 55.
AB Series
Selects to display the AB series screen
including the A4 size first.
Inches
Selects to display the Inches screen including the Letter size first.

Auditron Administration

The Auditron feature is used to prevent the machine from being used by unauthorized
users and also to track the total number of copies or prints produced with each account.
When the total number reaches the upper limit set up by Key Operator, users cannot
use the copy/print feature on the machine. When the Auditron features is enabled,
users need to enter password to display the [System Settings] screen, or use the copy,
fax, and e-mail features on the machine.
Xerox CopyCentre/WorkCentre 118 User Guide
Auditron Administration
131