Specifying Destinations - Xerox Copycentre C118 User Manual

1.
Press the <Stop> button on the control
panel to cancel the current fax job.
2.
If required, press the <Job Status>
button on the control panel to display
the Job Status screen. To exit the Job
Status screen, press the <Exit> or <Job
Status> button.
3.
If the job to be canceled is displayed on
the Current screen, select [Stop
(Delete)] using the <Select> button.
If not, go to step 4.
4.
Press the < > button to display the All Jobs screen.
5.
Select [Fax/E-mail] using the <Select> button.
6.
Select [Send] using the <Select> button.
7.
Select the job to be canceled by selecting [ ] or [ ].
8.
Select [Details] using the <Select> button.
9.
Select [Stop (Delete)] using the <Select> button.

Specifying Destinations

This section describes how to specify destinations using the features available on the
machine. For more information, refer to the following.
Address Enter/Next – page 66
Address Book – page 66
Speed Dial – page 67
One Touch Dial – page 67
Relay Broadcast – page 68
NOTE: You can also specify multiple destinations at once (serial broadcast
transmission) without pressing the <Address Enter/Next> button, using Speed Dial,
One Touch Dial.
Xerox CopyCentre/WorkCentre 118 User Guide
Specifying Destinations
<Stop> button
<Job Status> button
65