Document Size Detection Table; When Using The Copy Feature - Xerox Copycentre C118 User Manual

12 Specifications
First Copy Out Time
Using the Document Glass from Tray 1, A4 or 8.5×11" (Letter) LEF: 7.4 seconds or less
Warm-up Time
Cold Start: 25 seconds or less
Document Feeder (ADF/DADF)
Capacity: 50 sheets (81.4 g/m
Paper Sizes:
(with ADF): 128 (W) × 100 mm to 307 × 1000 mm
(with DADF): 128 (W) × 140 mm to 307 × 1000 mm or 307 × 432 mm in double-sided
mode.
Paper Weights: 38–128 g/m
Mixed Sizes: Yes – if so specified on the machine and the lead edges of documents
have the same dimension.
Auto Size Sensing: Yes
NOTE: When copying an undetectable-size document using the document feeder, the
machine prompts you to select a paper tray. However, for fax and e-mail jobs, the
machine automatically selects the nearest standard size. For more information, refer
to Document Size Detection Table on page 198.
Document Glass
Paper Sizes:
Max: 301(W) × 431.8 mm
Auto Size Sensing: Yes
NOTE: When copying undetectable size document is placed on the document glass,
the machine prompts you to select a paper tray. However, for fax and e-mail jobs, the
machine automatically selects the nearest standard size. For more information, refer
to Document Size Detection Table on page 198.

Document Size Detection Table

When Using the Copy Feature

The following table shows the sizes of documents that can be detected on the machine
when copying. The detected size depends on your country and where you place the
document: on the document glass, or in the document feeder.
NOTE: If the document is not a standard size, or the size cannot be detected, the
machine prompts you to select the paper tray.
198
2
)
2
(16–32 lb)(50–128 g/m
Xerox CopyCentre/WorkCentre 118 User Guide
2
in double-sided mode)