Audio Tones; Scanning Timer - Xerox Copycentre C118 User Manual

Xerox printer user guide
Hide thumbs Also See for Copycentre C118:
Table of Contents

Advertisement

9 Setups
Auto Clear
With this feature enabled, the machine clears the programming selections if you do not
perform any operation within the selected period of time. When you select [On], you can
select a time period in the range of 1 to 4 minutes.
Power Saver
Places the machine into the Low Power Mode when you do not perform any operation
within the specified period of time (1 to 60 minutes), and then into the Sleep Mode when
it stays in the Low Power Mode beyond the specified period of time (1 to 239 minutes).
In the Sleep Mode, the machine saves more power than in the Low Power Mode. Set
the total time of Low Power Mode and Sleep Mode within 240 minutes.
Press the <C> button to clear the entered value, and then enter a new value using the
numeric keypad on the control panel.

Scanning Timer

After pressing the <Start> button and scanning the document using the document
glass, the machine displays the screen that can select whether or not to scan the next
document. This feature allows you to specify the period of time the machine displays
the screen, within the range of 1 to 20 seconds. If no action is carried out after the
screen has been displayed for the specified period of time, the machine will assume
that there are no more documents to be scanned and process the job.
Press the <C> button to clear the entered value, and then enter a new value using the
numeric keypad on the control panel.

Audio Tones

Use this feature to configure the tone setting for various actions. Specify where or not
the individual tone is to be activated for each type of action.
Panel Select
Specify whether to activate the tone when an appropriate button is pressed.
Panel Alert
Specify whether to activate the tone when an inappropriate button is pressed.
Base
Specify whether to activate the tone when a toggle button is pressed and is set to the
reference position.
Job Complete
Specify whether to activate the tone when a job finishes successfully.
128
Xerox CopyCentre/WorkCentre 118 User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents