Reduce/Enlarge; Paper Type Screen - Xerox Copycentre C118 User Manual

3 Copy
[Paper Type] screen
Use this screen to select a paper type for Tray 5 (bypass tray). For more information
on the paper types, refer to Paper Type in the Setups chapter on page 136.
1.
After selecting the paper size on the
[Paper Size] screen, press the <Enter>
button.
2.
Select the required option.
3.
Press the <Enter> button.

Reduce/Enlarge

In addition to 100% size for copies, reduced or enlarged copies within the range of 50–
200% can be produced by selecting one of the [Reduce/Enlarge] options.
1.
Press the < > or < > button to display
[Reduce/Enlarge] on the Copy screen.
2.
Select [Reduce/Enlarge] using the
<Select> button.
3.
Select the required option.
4.
Press the <Enter> button.
NOTE: The <Enlarge> or <Reduce> button on the control panel provides a quick way
of using this feature.
100%
Makes copies the same size as the document.
Auto %
Automatically reduces/enlarges the image of the document to fit on the paper size
selected.
Presets
Allows you to select a reduction/enlargement ratio using the <Select> button. The one
preset ratio can be set up by the Key Operator.
Manual Entry
There are two methods of manual entry for the reduction/enlargement ratio.
• Select [100%] , and then pressing the < > or < > button to change the value in
increments of 1%.
• Select an option other than [Auto] and press the <C> button on the control panel,
and then enter the reduction/enlargement ratio directly using numeric keypad on the
control panel.
56 Xerox CopyCentre/WorkCentre 118 User Guide