Xerox Copycentre C118 User Manual page 181

The machine displays a memory full error
message.
While scanning the document, the machine
displays a message that prompts you to load
paper.
While outputting a copy job, the machine
displays a message that prompts you to load
paper.
When you place a document on the
document glass, the machine displays a
message that prompts you to load paper.
The machine displays a tray fault.
Xerox CopyCentre/WorkCentre 118 User Guide
Symptom
Troubleshooting Tables
Recommendation
• Check with the Key Operator about
available memory.
• Divide the remaining pages of the job into
several small jobs and run the job again.
• Delete unnecessary documents to free up
some memory.
The sizes of paper currently loaded in the
trays are not suitable for the reduction/
enlargement ratio and document size
specified.
• Select a required paper tray. Any scanned
data is discarded, so load the document
on the document feeder again, specify the
copy settings if necessary, and press the
<Start> button to restart the job.
• Load the correct sized paper in the
selected tray. Any scanned data is
discarded, so load the document on the
document feeder, specify the copy settings
if necessary, and press the <Start> button
to restart the job.
Load the correct sized paper in the selected
tray. The scanned pages before the message
is displayed will be printed out. Load the
remaining pages on the document feeder and
press the <Start> button.
The sizes of paper currently loaded in the
trays are not suitable for the reduction/
enlargement ratio and document size
specified.
• Select a required paper tray. To restart the
job, specify the copy settings if necessary,
and press the <Start> button.
• Load the correct sized paper in the
selected tray. To restart the job, press the
<Start> button.
• Follow the steps below
1. Open the paper tray.
2. Move the paper tray guides away from the
paper.
3. Move the paper tray guides against the
paper so that they are just touching the
paper.
4. Close the paper tray.
5. Power the machine off and then on.
181