Xerox Copycentre C118 User Manual page 192

11 Problem Solving
016-752
016-753
016-754
016-755
016-757
016-758
016-759
016-760
016-761
016-762
016-764
016-765
016-766
016-767
016-768
016-769
192
Code
The machine could not print the PDF file using the ContentsBridge utility
because of insufficient memory. Change the print mode in
ContentsBridge as follows and try again.
• If the high quality mode is selected, change it to the standard mode.
• If the standard mode is selected, change it to the high speed mode.
A password entered for the direct print is incorrect. Enter a password
correctly.
The machine could not print the PDF file because it contains objects that
are compressed using the LZW algorithm.
Print the file using the following methods.
• Open the file in Adobe Reader and select [Print] from the [File] menu.
• Use the PostScript feature.
The machine could not print the PDF file because it does not allow
printing. Open the file in Adobe Acrobat (not Adobe Reader) and
deselect the [No Printing] check box in the document security settings,
and print again.
The password entered is incorrect. Enter the correct password.
The account is not authorized for copying. Contact the Key Operator.
The maximum number of copies has been reached. Contact the Key
Operator.
An error occurred during PostScript processing. Take one of the
following actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
An error occurred during image processing. Set for optimized speed in
the print driver and try again. If this does not fix the problem, set for
highest compatibility to ensure printing and try again.
An unsupported print language was specified. Specify the print
language in [Print Mode].
Could not connect to the SMTP server. Contact the Key Operator.
Could not send e-mail because the SMTP server was full. Contact the
Key Operator.
An error occurred on the SMTP server. Contact the Key Operator.
Could not send e-mail as the e-mail address was wrong. Verify that the
e-mail address is correct, and try sending the e-mail again.
Could not connect to the SMTP server because the e-mail address of
the machine was incorrect. Check the e-mail address of the machine.
The SMTP server does not support delivery confirmation (DSN). Send
e-mail without setting confirmation.
Description and Corrective Action
Xerox CopyCentre/WorkCentre 118 User Guide