Maintenance / Repair; Disposal Information - Otto Bock B500 Series Instructions For Use Manual

Maintenance / repair

Fig. 4 Front (left) and rear (right) eyebolts
7.3 Handover
WARNING
Lack of instruction
Risk of falling, tipping over due to lack of knowledge
► Instruct the user or the attendant in the proper use of
the product when handing it over.
The following steps must be performed for the safe delivery
of the wheelchair:
• Have the user get into the wheelchair and perform a trial
seat fitting. Pay special attention to proper positioning
according to medical considerations.
18 | Ottobock
• The user and any attendants must be instructed in safe
use of the wheelchair. In particular, the enclosed instruc­
tions for use (user) are to be used.
• The instructions for use (user) must be issued to the user
or an attendant during handover of the wheelchair.
• The user should acknowledge that they have been
instructed in how to use the product and were informed
of the residual risks.
8 Maintenance / repair
The manufacturer recommends regular maintenance of the
product every 12 months.
The instructions for use (user) contain further information on
cleaning/disinfection as well as maintenance/repair by the
user.
Detailed information
ming/troubleshooting of the control unit can be found in the
service manual.
9 Disposal

9.1 Disposal Information

NOTICE
Disposal of batteries
Pollution due to incorrect disposal
on repairs and program­
B500 Family