Otto Bock B500 Series Instructions For Use Manual page 9

3.4 Programming safety instructions
WARNING
Incorrect configuration settings
Falling, tipping over, collision due to programming errors
► Programming may only be performed by qualified per­
sonnel trained by the manufacturer. The manufacturer of
the product and the control unit manufacturer are not
liable in case of damage caused by programming which
was not performed properly and/or which was not
adjusted properly according to the user's abilities.
► Note that modified parameter settings in the configura­
tion can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking
or joystick settings can lead to unexpected and there­
fore uncontrollable driving characteristics and cause an
accident.
► After configuration/programming is complete, the user
must test the driving characteristics of the product
under the supervision of the qualified personnel.
B500 Family
Safety
Ottobock | 9