Speed Dialing; Storing A Number For Speed Dialing - Xerox WorkCentre 480cx User Manual

Print the 480cx User Guide

Speed Dialing

You can store up to 50 numbers in two digit Speed Dial locations (01-50).

Storing a Number for Speed Dialing

You can assign up to 50 fax or telephone speed dial numbers using the two
digit numbers 01-50 on the Number keypad.
1
Press and hold the Speed/Dual button for 2 seconds.
2
Enter a two digit location number (01 through 50) to which you want to
store a number, then press the Start/Enter button.
If a number is already stored in the location, the display shows the
number in the upper line and 1:RENEW 2:OTHER in the bottom line.
Press 1 to delete the existing number or 2 to select another speed dial
number.
3
Enter the telephone number you want to store, then press the Start/
Enter button.
4
To assign a name to the number, enter the desired name. For
information on how to enter names, see Entering Alphanumeric
Characters on page 3-26.
Or
If you don't want to assign a name, skip this step.
5
Press the Start/Enter button when the name appears correctly or
without entering a name.
6
To store more telephone numbers, repeat steps 2 through 5.
Or
To return to Standby mode, press the Stop button.
Configuring Automatic Dialing Features
3
3-19