Type Photo - Xerox 5101 User Manual

•
4. Press the Enter key to confirm the selection.

Type Photo

Select Photo when the document contains a gray scale or color image, such as a photograph.
When Photo is selected in the Scan Mode, the screen below will be displayed. The screen
provides additional options for the user.
COMPRESSION:
FORMAT:
The SCAN OPTIONS (PHOTO) menu allows you to perform the following functions:
•
Enable or disable PREVIEW in Photo mode. When PREVIEW is enabled, a small
JPEG (.JPG) file is created during the scanning process and stored on the hard disk.
The FreeFlow Accxes Client Tools software, running on a network-connected
terminal, can use this file to display a preview of the scanned image.
•
Specify the saved document compression format for Photo mode.
•
View the saved document file format for Photo mode. The format is 8 bit TIFF.
NOTE: This option will not be displayed unless the Scan-to-Net feature is enabled. To order this
feature, contact your XEROX representative.
NOTE: The Background Suppression option cannot be used with the Photo setting. If Photo is
selected, Background Suppression is automatically set to Off.
1. Enter the SCAN mode by pressing the Mode key, then entering the Directory Name
and pressing the Enter key.
2. Select Photo by pressing the arrow key below Original, Type key. The screen
shown below is displayed.
COMPRESSION:
FORMAT:
3. Press the Previous or Next key to highlight the scan option you wish to change.
Wide Format Copy System User Guide
SOFTWARE, RUNNING ON A NETWORK CONNECTED TERMINAL, CAN USE
THIS FILE TO DISPLAY A PREVIEW OF THE SCANNED IMAGE.
FILE FORMAT — DEFAULT IS TIFF. USE THE NEXT AND PREVIOUS KEYS
TO SELECT THE FORMAT FOR THE DOCUMENT TO BE SAVED AS. THE
SELECTION IS TIFF, CALS OR PDF/A.
SCAN OPTIONS (PHOTO)
PREVIEW
RAW
TIFF
Scan Options (Photo) Screen
SCAN OPTIONS (PHOTO)
PREVIEW
RAW
TIFF
Scan Options (Photo) Screen
4 Image Quality
51