Cleaning The Calibration Strip - Xerox 5101 User Manual

Cleaning the Calibration Strip

Perform the following steps monthly:
1. Press the Menu key, then scroll to the Diagnostic and press the Enter key.
•
•
NOTE: The Top Cover must be closed while running this test.
2. Raise the Top Cover.
3. Inspect the Calibration Strip.
4. Place a small amount of platen glass cleaning fluid (Xerox 43P81) on a clean, lint-
free towel (600S4372) and clean the Calibration Strip.
5. Lower the Top Cover.
6. Press the Enter key to select HOME POSITION.
7. Press the Exit key to exit the CLEAN CAL ZONE.
8. Press the Menu key to return to the READY screen. The Calibration Strip
automatically returns to its home position.
Wide Format Copy System User Guide
Scroll to CLEAN CAL ZONE and press the Enter key.
Press the Enter key to select CLEANING POSITION.
12 Cleaning and Maintenance – Scan System
147