Xerox 5101 User Manual page 132

10 Main Menu
•
RESET NVR DEFAULTS - Enables the Customer Service Engineer to reset the NVR
values to the factory default values. The diagnostic password is required for this
function.
•
SCANNER RELIABILITY METER - Enables you to gather data about the usage of
the scanning mechanism.
•
SCANNER FAULTS (ORDERED) - Enables you to view the entries in the internal
Scanner Fault Log.
•
FAULTS (COUNTS) - Enables you to view the last cleared faults.
•
CLEAR SCANNER FAULT LOG - Enables the Customer Service Engineer to erase
the contents of the Scanner Fault Log. The diagnostic password is required for this
function.
•
CLEAN CALIBRATION ZONE - Enables you to quickly move the calibration surface
to the cleaning position.
•
COMPONENT TESTS - Provides a sub-menu of Scanner component diagnostic
routines. Some of these routines are accessible by both the operator and the
Customer Service Engineer. Others are accessible by the Customer Service
Engineer only and require the entry of the diagnostic password.
•
READ NVR - Enables you to examine the contents of the non-volatile RAM (NVR).
To access the SCANNER DIAGNOSTICS menu:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is
displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is highlighted.
5. Press the Enter key to highlight SCANNER DIAGNOSTICS. The SCANNER
DIAGNOSTICS menu screen is displayed. The black arrows indicate that the menu
contains more options than are visible. The selected option is highlighted.
IMAGE PATH
SCAN BAR
FULL SYSTEM TEST
6. Press the Previous or Next key to scroll through the list of options.
7. When the desired option is highlighted, press the Enter key to select the option. The
menu or screen for the selected option is displayed.
126
SCANNER DIAGNOSTICS
Scanner Diagnostics Screen
Wide Format Copy System User Guide