F
A
A : Left Oversize Document Sensor
B : Exit
C : Right Oversize Document Sensor
c) Observe the Display. When the sensor is activated the icon O is filled in.
d) Move the sheet of paper fully to the left and right to check the LEFT and RIGHT
10. To check the status of the thick document sensor:
a) Raise the Thick Document Lever. When the sensor is activated the icon O is
b) When finished viewing the status of the thick document sensor, lower the Thick
11. To check the status of HOME sensor.
a) Raise the Document Handler just enough to access the Calibration Roll drive
b) Rotate the Calibration Roll one full revolution. The status will change from NO to
Wide Format Copy System User Guide
Sensor Locations on the Wide Format Scan System
E
D
sensors.
filled in.
Document Lever.
gear and still be able to see the Display.
YES if the sensor is okay.
B
F
C
D : Register
E : Input
F Discrete Width Sensors (Four on
left and four on right)
10 Main Menu
135