Copying Bound Documents Using Build Job - Xerox Document Centre 240 DC User Manual

Copying Bound Documents using Build Job

Typical Application
Copy a multipage article that is spread throughout a
bound document all at once.
Procedure
1. Open the Document Cover and place the bound
2. Make your programming selections by touching the
3. Use the keypad to enter the number of copy sets.
4. Depending on the configuration of your machine
5. Select Build Job then the Build Job On button. Press
6. Press the Bound Originals button then press the
7. Press the Start (
8. Repeat this process until all the pages you want to
9. Press End Build Job.
Page 48
original on the Document Glass. Align the spine of
the bound document with the Book Binding mark.
screen. The most common selections are on the Basic
Copying Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
press the More Copy Features Tab or the Job
Assembly Tab. If the More Copy Features Tab is
selected press the Job Assembly Tab.
Save.
button that identifies which pages you want to copy.
) button.
copy have been scanned.
Xerox Document Centre User Guide