Making Transparencies With Dividers - Xerox Document Centre 240 DC User Manual

Making Transparencies with Dividers

Typical Application
Originals
Produce transparency sets with divider inserts.
Procedure
1. Ensure that transparencies and divider separator stock
2. Load the originals into the Document Feeder.
3. Depending on the configuration of your machine
4. Press the Transparencies button.
5. On the Transparency Dividers screen, select either
Transparencies
with Dividers
6. Press the Transparency Stock button to change the
7. Press the Start (
Page 44
are loaded into different paper trays.
press either the More Copy Features Tab or the
Output Format Tab. If More Copy Features Tab is
selected press Output Format Tab.
Blank or Imaged Dividers. Selecting Imaged Dividers
will produce dividers with the same image as on the
transparency.
Ensure both tray selections are correct.
Press a button to change the selection.
current tray selection. Press the Divider Stock button
to change the current divider stock selection.
) button.
Xerox Document Centre User Guide