Removing Unwanted Marks On The Edges Of Copies - Xerox Document Centre 240 DC User Manual

Removing Unwanted Marks on the Edges of Copies

Typical Application
Remove distracting marks on your copies.
Procedure
1. Load your originals.
2. Make your programming selections by touching the
3. Use the keypad to enter the number of copy sets.
4. Depending on the configuration of your machine
5. Press the Edge Erase button.
6. Select either Edge Erase or Border Erase.
7. Press the Save button.
8. Press the Start (
HINT To erase drill hole marks on your copies, set the edge
deletion to 0.7 inches.
Page 38
screen. The most common selections are on the Basic
Copying Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
press either the More Copy Features Tab or the Image
Adjustment Tab.
Use Edge Erase to erase any of the margins on the
copies independently.
Use Border Erase to create a uniform border around
your copies.
) button.
Xerox Document Centre User Guide