Placing Multiple Images On A Single Page - Xerox Document Centre 240 DC User Manual

Placing Multiple Images on a Single Page

Typical Application
Any situation where you want to present multiple
reduced images (thumbnail images) to a reader.
Procedure
1. Load your Originals.
2. Depending on the configuration of your machine
3. Press the Multi-Up button then press On.
4. Select the correct orientation of your originals based
5. Select the number of rows and columns. Press the
6. Ensure the originals are loaded into the Document
7. Make your programming selections by touching the
8. Use the keypad to enter the number of copy sets.
9. Press the Start (
HINT Sixteen 8.5 x 11 inch images can be displayed on 8.5 by
11-inch paper (4 rows x 4 columns).
Xerox Document Centre User Guide
press either the More Copy Features Tab or the
Output Format Tab. If the More Copy Features Tab
is selected press Output Format Tab.
on the information displayed on the screen.
Save button.
Feeder as illustrated on the Multi-Up screen.
screen. The most common selections are on the Basic
Copying Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
) button.
Page 43