Getting A Secure Print (For St Models) - Xerox Document Centre 240 DC User Manual

Getting a Secure Print (for ST models)

Follow these steps to get a secure print.
At the Workstation
1. In the Windows print driver, click Properties to get to
2. Once in the Document Centre Print Driver select the
3. Select Secure Print.
4. Select Secure Print Setup, enter a 4-Digit Secure
5. When you are ready to retrieve your secure print job
At the Document Centre
1. Press the Job Status button to display the job queue.
2. This will display a screen with additional options.
3. Press Release Job. You will be prompted for the
4. As soon as the correct Print ID is entered, your job
Page 32
a Document Centre Print Driver.
Paper/Output Tab and click the Job Type pull down
menu.
Print ID then click OK.
go to the Document Centre.
Touch your held job on the touch screen. It should be
easily identified by the file name.
Secure Print ID you assigned the job at your
workstation.
will print.
Xerox Document Centre User Guide