General Safety Requirements - Siemens SITRANS F Series Operating Instructions Manual

Connecting

5.1 General safety requirements

5.1 General safety requirements
The pertinent regulations must be observed for electrical installation.
● Never install the device with the mains voltage switched on!
● Danger of electric shock!
● The electrodes and magnetic current line may only be connected when the device is not
● If the housing is under voltage (power supply), the cover may be unscrewed by qualified
Mains supply from building installation Class II
A switch or circuit breaker (max. 15 A) must be installed in close proximity to the equipment
and within easy reach of the operator. It must be marked as the disconnecting device for the
equipment.
34
WARNING
connected to the power supply.
personnel only.
WARNING
SITRANS FM MAG 8000
Operating Instructions, 03/2020, A5E03071515-AH