Sealing Of Mag 8000 Ct; Verification Sealing; User Sealing - Siemens SITRANS F Series Operating Instructions Manual

4.7.1

Sealing of MAG 8000 CT

4.7.1.1

Verification sealing

Note
The verification sealing is done at factory after initial verification.
Note
For type-approved and verified MID MAG 8000 CT products
The verification sealing may only be broken by an authorized person, with the acceptance and
under direction of the local authorities.
Figure 4-9
4.7.1.2

User sealing

Note
User sealing has to be done after commissioning by an authorized person.
1. Lead one or two wires through the sealing bolts.
2. Seal the ends of each wire.
SITRANS FM MAG 8000
Operating Instructions, 03/2020, A5E03071515-AH
MAG 8000 CT verification sealing (A)
Installing/Mounting
4.7 MAG 8000 CT
31