Siemens SITRANS F Series Operating Instructions Manual page 143

Param‐ Meter Display
eter ID
version view
130 All -
131 All -
F.3 200-299
Param‐ Meter Display
eter ID
version view
200 All O4
201 All -
SITRANS FM MAG 8000
Operating Instructions, 03/2020, A5E03071515-AH
Parameter/data type
Menu active
Default operator menu index
Parameter/data type
Fault status
Alarm configuration list
Factory settings
Fixed parameter or meter data that are not changeable
63=all menus active
Totalizer 1
Factory settings
Fixed parameter or meter data that are not changeable
No faults
254 = Alarm 2 to 8 enabled 0 to 8191, See 200
Parameter lists
F.3 200-299
Data range
0 to 63, binary presented with
information
1 for bit 0
1: Operator menu
2: Meter info menu
3: Service menu
4: Log menu
5: Statistic menu
6: Revenue menu
If none of the above is active, the
message is: None active
Totalizer 1, Totalizer 2, Actual
Flow rate, Fault codes, Custom‐
er Totalizer
Data range
0 to 8191, binary presented with
information 1 for bit 0
1: Insulation error
2: Coil current error
3: Amplifier overload
4: Database checksum error
5: Low power warning
6: Flow overflow warning
7: Pulse A overload warning
9: Consumption interval warning
10/L: Leakage warning
11/E: Empty pipe warning
12/C: Low impedance (high con‐
ductivity) warning
13/d: High flow limit warning
14/A: Reverse flow warning
If no error/warning is pending,
the message is "No faults"
If no alarm is enabled, the mes‐
sage is "None enabled"
143