Flow Tool
C.4 Setting the basic parameters
"Automatic" configuration is selected if PC is
C.4
Setting the basic parameters
Note
No factory reset
The device is delivered with factory settings that are not stored as default values. Because no
default values are present in the meter, an automatic return to factory values is not possible.
122
connected directly to meter.
"Manual" configuration is selected if configu‐
ration is made without any connection to a me‐
ter.
Configuration is downloaded to the meter af‐
terwards.
Operating Instructions, 03/2020, A5E03071515-AH
SITRANS FM MAG 8000