4.2. Monitor View; 4.3. Advanced View - powersoft IpalMod User Manual

Table of Contents

15 : 4.2. Monitor View

By clicking on the amplifier module from ArmoníaPlus' Workspace, at first opening you enter the Monitor view of the

module, designed for the end user. In fact, all accessible settings do not permit to change internal DSP processing except

delay, mute state and reverse polarity. The gain fader behaves as an attenuator; the max level is provided than the gain amount

set inside the DSP.

Clicking on Advanced view , is possible entering deep inside in DSP processing, of course this is permitted only for a

manufacturer with a pre-registered IpalMod license, Advanced view button does not show in case of missed license. When you

pass in Advanced view first time after the initialization as Powersoft Model, no password will be requested.

The advanced view provides a set of algorithms for tuning loudspeaker, including the DPC and impedance control, by

clicking on Monitor view push button is possible to switch back to Monitor view mode.

22 | IpalMod | User guide

Table of Contents

Do you have a question about the IpalMod and is the answer not in the manual?