2.Initialization Framework; 2.1. Initialization Workflow - powersoft IpalMod User Manual

14 : 2.initialization framework

14 : 2.1. Initialization workflow

In order to initialize the DSP on board and external Powersoft DSP, the ProManager Plus™ proposes two approaches:
Powersoft init or Custom init. The former initializes your DSP with default settings, while the latter initializes the DSP with your
custom processing and it will allow ArmoníaPlus™ to identify your system as proprietary. As shown on the workflow, before
directly proceeding with a custom initialization of the DSP, you are required to create a valid custom model for your product in
which the presets – previously created for the Powersoft model with ArmoníaPlus™ – will be included.
This process of initialization will allow the DSP to take care of the processing and the level of the input signal according to
the known
characteristics of the Powersoft amplifier module to which the DSP is associated to.
Furthermore, this process will also identify your DSP as part of a Powersoft system, which will permit you to discover the
device when online in ArmoníaPlus™. The latter is a fundamental requirement in order to create your original processing and
your proprietary DSP presets designed for your whole finished system.
3
Initialization as prototype
4
Making custom preset
5
Custom model building
START
Software Installation
Sign Up & Brand Register
@ oem.powersoft.com
NOT
Already created your
CUSTOM MODEL
7
1
2
YES
Initialization as End Product
Exporting Models
6
Publishing on A+
8
market place
Initialization | 15