Table of Contents
Advertisement
2 I/O Modules
2.1 Digital Output Modules
2.1.1 750-532 [4 DO DC 24 V 0,5 A, High-Side Switching, Diagnostics]
4 Channel Digital Output Module DC 24 V 0,5 A,
2-conductor, short-circuit-protected; high-side switching, diagnostics
2.1.1.1
View
DO 1 ... DO 4
Fig. 2.1.1-1: 4 Channel Digital Output Module 750-532
2.1.1.2
Description
The connected load is switched via the digital output from the control system.
These output modules can recognize a short circuit to ground, a line break and
an overload in either channel.
The module has four output channels. Four 2-conductor actuators may be
directly connected to the module.
The actuators can be connected using connection DO 1 or DO 2, DO 3, DO 4
and 0 V.
The connection of 3-conductor actuators to this module requires a field side
connection module (750-603 or 750-614) for 24 V supply.
Note
For the connection of inductive loads a protected circuit, e. g. a recovery
diode, has to be switched parallel to this load.
The output channels are electrically short-circuit-protected and high-side
switching. Which means that the status of the output channels is "high" if the
output channels switch to the 24 V supply voltage for the field side.
WAGO-I/O-SYSTEM 750
I/O Modules
750-532 [4 DO DC 24 V 0,5 A, High-Side Switching, Diagnostics]
13 14
Status
Diagnose
A1 A2
DO 1
A3 A4
A5 A6
A7 A8
DO 3
750-532
Datenkontakte
DO 2
0 V
0 V
DO 4
Leistungskontakte
• 7
View
g053200e
Advertisement
Table of Contents
