Technical Data - WAGO 750-532 Manual

10 • 750-532 [4 DO DC 24 V 0,5 A, High-Side Switching, Diagnostics]

Technical Data

2.1.1.5 Technical Data
Module specific Data
Number of outputs
Current consumption (internal)
Voltage via power jumper contacts
Type of load
Switching rate
Reverse voltage protection
Output current
Short-circuit limitation
Diagnostics
Open-circuit detection
in the switched off status
Energy dissipation W
(unique switching off)
Isolation
Current consumption
Internal bit width
Dimensions (mm) W x H x L
Weight
Standards and Regulations (cf. Chapter 2.2 of the Coupler/Controller Manual)
EMC-Immunity to interference (CE)
EMC-Emission of interference (CE)
Approvals (cf. Chapter 2.2 of the Coupler/Controller Manual)
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412)
or in the internet under:
www.wago.com
System Description
max.
max.
typ. Pwm
max.
(field side)
typ.
UL (UL508)
C US
Conformity Marking
! Documentation ! WAGO-I/O-SYSTEM 750 !
4
10 mA
DC 24 V (-25 % ... +30%)
resistive, inductive, lamps
2 kHz
Yes
0,5 A, short-circuit-protected
6 A
open circuit, overload and short circuit
< 0.9 mA at 24 V
typ.
(> 2.0 mA -> no open circuit operation)
0.125 J
L ≈ 2 W /I²
max. max.
500 V (System/Field)
13 mA (per module) + load
4 Bit Out, 4 Bit In (Diag)
12 x 64* x 100
* from upper edge of 35 DIN rail
ca. 50 g
acc. to EN 61000-6-2 (01)
acc. to EN 61000-6-3 (01)
WAGO-I/O-SYSTEM 750
I/O Modules