Mitsubishi Electric Melservo MR-J5 G Series User Manual page 43

When the network is not connected
The network connection status is displayed for each axis.
1-axis servo amplifier
Network status
The 7-segment LED display during initialization is as follows.
Display
2-axis servo amplifier
B-axis network status
A-axis network status
Status Description
Controller not connected Indicates that the servo amplifier is not connected to the controller.
Data not linked Indicates that initial communication for CC-Link IE TSN is in progress.
Cyclic communication in Indicates the Pre-Operational state shown in the state transition diagram of the NMT
progress state machine.
Indicates the Safe-Operational state shown in the state transition diagram of the NMT
state machine.
Cyclic communication Indicates that the servo amplifier is in the state of the reserved station.
being stopped
3-axis servo amplifier
C-axis network status
B-axis network status
A-axis network status
3.2 Switch setting and display of the servo amplifier
3
3 STRUCTURE
41