Daewoo B20S-2 Disassembly/Assembly page 58

9
8
4. Disconnect the four steering gear hoses.
Disconnect wires (8) from the ignition switch.
5. Disconnect all kinds of connector (9).
6. Remove bolts, clamp (10) and directional switch
(11) from the steering column. Disconnect hose
(13) from the steering gear.
IDCD314S
7. Remove four bolts (14), and separate steering
gear (16) from steering column (15). Remove
steering column (15) from the support assembly.
Vehicle Systems
11
10
13
8. Remove the nuts, washers and bolts (18).
Remove the bushings if a replacement is neces-
sary. Remove support assembly (17) from the
cowl. Remove ignition switches if necessary.
Install Steering Column
1. Install ignition switches into support assembly (17)
if they were removed. Install the bushings if they
were removed. Put the support assembly in posi-
tion on the cowl. Install bolts (18), washers, nuts.
57
17
18
17
18
Disassembly & Assembly