Daewoo B20S-2 Disassembly/Assembly page 55

IDCD298S
21. Rotate spool and sleeve assembly until pin is
parrallel with port face. Install drive, make sure
you engage drive with pin, To assure proper
alignment, mark drive as shown. Note relation-
ship between slotted end fo drive to splined end
of drive when marking.
Seal
IDCD299S
22. Install 73,5 mm [2.89 in.] ID seal in spacer plate
or gerotor (meter).
Vehicle Systems
Port Face
Drive
Pin Parallel
with Port
Face
Pin
Seal Groove this Side of Gerotor (Meter)
Star Valley
Drive
(Marked)
Pin
IDCD300S
23. With seal side of meter toward spacer plate, align
star valleys on drive. Note the parallel relation-
ship of reference lines A, B, C, and D. Align bolt
holes without disengaging meter from drive.
54
A
B
C
D
Port Face
Disassembly & Assembly