Daewoo B20S-2 Disassembly/Assembly page 48

Drive
IDCD281S
8. Remove drive.
9. Remove spacer plate.
10. Remove seal from housing.
Vehicle Systems
Drive
Seal
IDCD282S
11 Remove housing from vise. Place housing on a
clean soft cloth to protect surface finish. Use a
thin bladed screwdriver to pry retaining ring from
housing.
Seal Gland
Bushing
IDCD283S
12. Rotate spool and sleeve until pin is horizontal.
Push spool and sleeve assembly forward with
your thumbs just far enough to free gland bush-
ing from housing. Remove bushing.
47
Control End
Disassembly & Assembly