Assemble Secondary Lift
Cylinders
IDCD209P
1. Install U-packing (1) in the bearing.
2. Install wiper seal (2) and retaining ring (3). Install
the seal with the lip toward the outside.
IDCD208P
3. Install O-ring (4), wear ring (5) and slyd ring (6) in
the bearing.
7
IDCD207P
4. Install check valve (7), retaining ring (8) and spac-
er (9).
Vehicle Systems
1
2
3
4
5
6
8
9
13
IDCD206P
5. Install stop rings (10) on the cylinder rod.
6. Install wear ring (11), U-packing (12) and backup
ring (13).
14
IDCD204P
7. Install cylinder rod (14) in the cylinder body.
15
IDCD203P
8. Install bearing (15) on the cylinder rod and tighten
using tool (B).
End By :
a. Install secondary lift cylinders *
* Refer to the topic GGAssemble MastH in this module.
31
10
11
12
B
Disassembly & Assembly