Daewoo B20S-2 Disassembly/Assembly page 42

IDCD273S
3. Install O-ring seal (5) on the cylinder rod.
4. Install piston (6) on the cylinder rod.
IDCD274S
5. Install rings (7).
6. Use tool (A) to install retaining rings (8) on each
side of the piston.
Vehicle Systems
IDCD275S
7. Install cylinder tube (9) on the rod assembly.
IDCD276S
NOTE : Install the nuts and rods (A) on steering
cylinder after installing the cylinder end caps. (see
"Remove & Install Steering Cylinder" in this module)
8. Install end caps (11) on cylinder tube (10).
End By :
a. Install the steering cylinder.
41 Disassembly & Assembly