Daewoo B20S-2 Disassembly/Assembly page 41

IDCD268S
6. Remove and inspect O-ring seal (6).
IDCD269S
7. Remove seal (7) from the piston.
IDCD270S
8. Disassemble each end cap as follows ;
a. Remove O-ring seal (10).
b. Remove wear ring (8).
c. Remove u-cup seal (9).
Vehicle Systems
Assemble Steering Cylinder
Tools Needed
Pliers
IDCD271S
1. Assemble each end cap as follows ;
a. Install O-ring seal (2).
b. Install wear ring (1).
c. Install u-cup seal (3).
IDCD272S
2. Install seal (4) on the piston.
40 Disassembly & Assembly
A
1