Daewoo B20S-2 Disassembly/Assembly page 49

Dust
Seal
IDCD284S
13. Remove quad ring seal from seal gland bushing.
14. Use a thin bladed screwdriver to pry dust seal
from seal gland bushing. Do not damage
bushing.
Bearing
Needle
Race
Thrust
Bearing
Bearing
Race
IDCD285S
15. Remove 2 bearing races and the needle thrust
bearing from spool and sleeve assembly.
Vehicle Systems
Quad
Ring
Seal
Seal
Gland
Bushing
IDCD286S
16. Remove spool and sleeve assembly from 14 hole
end of housing.
ATTENTION: Do not bind spool and sleeve in houst-
ing. Rotate spool and sleeve assembly slowly when
removing from housing.
17. Push pin from spool and sleeve assembly.
48
Pin
Disassembly & Assembly