Assemble Standard Lift
Cylinders
8
1. Install seal (2) in the bearing.
2. Install wiper seal (1). Install the seal with the lip
toward the outside.
IDCD410P
NOTE : Install back-up ring (4) with the curved side
contacting the O-ring seal.
3. Install O-ring seal (3) and back up ring (4) into the
bearing.
Vehicle Systems
9
IDCD409P
4. Install split rings (5) on the cylinder rod.
IDCD411P
IDCD408P
6
5. Install cylinder rod (6) in the cylinder body.
7
ICD407P
6. Install bearing (7) on the cylinder rod and tighten
using wrench (C).
28
5
4
C
Disassembly & Assembly
5