Daewoo B20S-2 Disassembly/Assembly page 11

12
IDCD008P
12. Install cross head(12) and retaining ring(11).
10
IDCD009P
13. Put the chains in position over cross head(12).
Install nuts(9) onto the chain anchors.
Install bolts(10) onto the hose mounting bracket.
6
IDCD006P
14. Install chain guard/hose support assembly(6) and
four bolts(8).
Vehicle Systems
11
9
8
IDCD005P
15. Connect two hydraulic line(4) in their original
positions.
End By:
a. Install backrest.
b. Install forks.
Disassemble Carriage
Start By:
a. Remove carriage.
1
IDCD011P
Typical Example
1. Remove the roll pins and pins(2) to disconnect
chains(1).
10
4
2
Disassembly & Assembly