Daewoo B20S-2 Disassembly/Assembly page 10

12
IDCD008P
Typical Example
5. Use tool(A) to remove retainer ring(11) from the
cross head shaft.
6. Remove cross head(12) from the shaft.
IDCD009P
7. Remove carriage bolts(13).
Vehicle Systems
11
15
IDCD010P
8. Raise the inner mast to pull out carriage as
shown.
9. Remove carriage from bottom of inner mast(15).
Carriage(14) weighs 116kg(255 lb).
13
NOTE: Use the following steps to install the carriage.
10. Raise the inner mast to put in the carriage onto
IDCD009P
11. Install carriage bolts(13).
9
the mast, and lower the inner mast to cover
carriage(1) bearing fully.
Disassembly & Assembly
14
13