Daewoo B20S-2 Disassembly/Assembly page 37

Disassemble & Assemble Tilt
Cylinders
Tools Needed
Spanner Wrench
Start By:
a. Remove tilt cylinder.
A
1
2
IDCD421P
1. Use tool (A) to remove head (1) from the cylinder
body.
NOTICE
Use extra care not to damage the highly finished
surface of the cylinder rod and the bore of the cylin-
der body during disassembly and assembly of the tilt
cylinder.
2. Remove rod assembly (2) from the cylinder body.
IDCD422P
3. Remove nut (3) from the cylinder rod.
Vehicle Systems
3
4
5
4. Remove piston and seal assembly (4) from the
cylinder rod.
5. Remove head assembly (5).
A
1
IDCD423P
6. Remove spacer (6) from the cylinder rod.
7. Loosen the nut and bolt on the rod eye.
Remove cylinder rod (7) and shims (8).
10
IDCD424P
8. Remove seal assembly (10) and O-ring seal (9)
from the piston.
36
6
7
8
6
Disassembly & Assembly