Daewoo B20S-2 Disassembly/Assembly page 35

14
IDCD214P
7. Remove wiper seal (12) and retaining ring (13)
and U-packing (14) from the bearing.
Assemble Primary Lift
Cylinders
Tools Needed
Hydraulic Cylinder Repair Stand
Wrench Assembly
1
IDCD214P
1. Install U-packing (1) in the bearing.
2. Install wiper seal (2) and retaining ring (3). Install
the seal with the lip toward the outside.
Vehicle Systems
12
13
IDCD213P
3. Install O-ring seal (4) and two slyd-rings(5).
A B
1
1
IDCD212P
4. Install check valve (6), retaining ring (7) and
2
3
spacer (8).
IDCD211P
5. Install wear ring (9), U-packing (10) and back up
ring (11) on the cylinder rod.
34
4
8
11 10
Disassembly & Assembly
5
6
7
9