Time (Clock); Timed Message Interval (Txd) - Labkotec idOil Solar Installation And Operating Instructions Manual

Installation and Operating Instructions | idOil Solar
7.4.3.

Time (CLOCK)

The time setting is needed if you wish to save log information with actual time stamps or if
you want the device to send timed messages to the end user or the LabkoNet server.
This setting can also be entered via the idOil unit's browser user interface.
The format of the time setting command is:
Field legend
CLOCK
<yyyy-mm-dd>
<hh:mm>
Example
Do the following to set the time.
Send the following message to the idOil device:
The device responds as follows:
In addition to the time, the response includes a possible name set for the device in
question.
7.4.4.

Timed message interval (TXD)

The idOil unit can be timed to send information on system status and possible alarms to the
recipients' phone numbers. The user can define interval in days and the specific time of the
message.
The timed alarm information message is described in the section "Alarm status query".
This setting can also be entered via the idOil unit's browser user interface.
The command format for setting the timed message interval is as follows:
Field legend
TXD
<nnn>
<hh:mm>
The factory default for the interval and time is 0 00:00. When the interval is set to 0, the
timed message is not in use.
Example 1
CLOCK <yyyy-mm-dd> <hh:mm>
CLOCK 2018-10-23 15:30
CLOCK <device name> 2018-10-23 15:30
TXD <nnn> <hh:mm>
Time setting command and query
Year (yyyy), month (mm) and date (dd)
separated with a hyphen.
Hours (hh) and minutes (mm) separated
with a colon.
Timed message interval command.
The timed message interval in days.
The time of the message – hours (hh) and
minutes (mm) – separated with a colon.
47/58
DOC001599-EN-3