Name Of The Device Or Location (Name) - Labkotec idOil Solar Installation And Operating Instructions Manual

Installation and Operating Instructions | idOil Solar
Example:
If the device name has not been defined, no numbers have been set and the entered
command is
the response is:
If, after this, the command
is entered, the response is:
7.4.2.

Name of the device or location (NAME)

This setting can also be entered via the idOil unit's browser user interface.
It is a good idea to set a unique name for the device or location so that alarm messages, for
example, show which device the message is coming from.
The format of the setting command is:
Field legend
NAME
<name of the device/location>
Example:
Send the following message to the idOil device:
The unit responds:
TEL <device name if specified>
1: <memory slot 1 telephone no>
.
.
5: <memory slot 5 telephone no>
TEL +35840111111 +35840222222 +35840333333
TEL
1: +35840111111
2: +35840222222
3: +35840333333
TEL +35840444444
TEL
1: +35840111111
2: +35840222222
3: +35840333333
4: +35840444444
NAME <name of the device/location>
NAME Pirkkala Myllyhaantie
NAME Pirkkala Myllyhaantie
Name setting command
Name freely selected by the user – up to 60
characters. The name can also contain
spaces.
46/58
DOC001599-EN-3