Labkotec idOil Solar Installation And Operating Instructions Manual page 25

Installation and Operating Instructions | idOil Solar
Figure 25. Sensor identifications; sensors found
If necessary, enter identifiers for the sensors in the Description field and press the
Save button.
If the control unit does not identify all connected sensors.
Check the sensor connections.
Once you have conducted the check, press the Detect sensors button again.
The control unit will look for the sensors for approx. 2 minutes, unless it has already found
three sensors. After the search, the device shows the number of sensors found in the
browser view and the System OK message in the control unit display.
The sensor detection can be interrupted by pressing the Stop detection button.
25/58
DOC001599-EN-3