Maintenance Schedule; Exterior Leak Test - Reflex Fillcontrol Plus Operating Manual

10.1

Maintenance schedule

The maintenance schedule is a summary of maintenance tasks to be carried out regularly.
Maintenance task
●
▲ = Check, ■ = Service,
= Clean
Check for leaks, see chapter 10.2 "Exterior leak test" on page 39 .
• Screw connections.
Check the makeup function, see chapter 7.5 "Function test" on page 25 .
Check the system-specific setting values in the controller, see
chapter 9.2.1 "Customer menu" on page 34 .
• Mindestbetriebsdruck „P
• "P " safety valve pressure.
SV
10.2

Exterior leak test

Check the following device components for leaks:
– "PU" pumps and screw fittings.
• Seal any leaks at the connections or replace the connections, if required.
• Seal leaking screw connections or replace, if required.
".
0
Fillcontrol Plus — 06.07.2016 - Rev. B
Conditions
▲ ■
▲
▲
Maintenance
Interval
Annually
Annually
Annually
English — 39