Technical Support - Avery Dennison Pathfinder 6059 Equipment Manual

This section lists common error codes and their descriptions.
Code(s) Description
004 - 005 Supply size is incorrect. Load the correct supplies.
267 – 271 Communication error. See your System Administrator.
410 - 413
703 - 704 Supply Error. Load supplies or make sure they are loaded correctly. See
Chapter 2,
706 Remove any jammed supplies. See
information. If the supply is not jammed or you have removed the jam, and
the error continues, see your System Administrator.
727 - 744 RFID Errors. See your System Administrator.
When the printer cannot program an inlay, it prints an overstrike pattern on
the label. The overstrike pattern prevents someone from using a bad label.
750 Printhead is overheated. Turn off the printer to let it cool.
751 - 753 The printer sensed a problem with a mark on the supplies. Check the
supplies to see if they are loaded correctly.
756 The printer is out of supplies. Load supplies. See Chapter 2,
Supplies" for more information.
757 The calibrated supply length differs by plus or minus .25 inches from the
format. Load supplies.
758 Check supply. Remove any printed labels. Check for a label jam. Clear the
supply path or reload supplies.
762 Low battery. Recharge the battery. See
information.
763 Waiting to dispense label. Press the trigger.
768 Printhead error. See your System Administrator.
790 - 791 The printer is busy or has an error pending. Turn off the printer, wait two
seconds, and then turn it back on.
904 – 911 System error. See your System Administrator.
SYSTEM System error. See your System Administrator.
ERROR
VECTOR ##
T e c h n i c a l S u p p o r t
If these solutions do not work or you have a problem or error code not listed, see your System
Administrator or call Technical Support. Before calling Technical Support, print a test label.
5-2 Equipment Manual
"Loading Supplies" for more information.
Classification: Avery Dennison – Public
"Clearing Supply Jams" for more
"Charging the
"Loading
Battery" for more