Charging The Battery; Replacing The Battery - Avery Dennison Pathfinder 6059 Equipment Manual

C h a r g i n g t h e B a t t e r y
The printer uses a 7.4V lithium-ion battery. The printer also uses a coin cell backup battery,
which is not customer replaceable. The backup battery keeps the printer's real time clock
settings.
Charge the battery when you receive the printer, even if you do not use the printer right away.
Warning: Do not substitute batteries.
Charge the battery using one of the Monarch® chargers listed in Appendix A,
"Specifications &
charger.
Charging time is approximately 1 – 3 hours. Refer to the documentation provided with the
chargers for more information.
R e p l a c i n g t h e B a t t e r y
To change the battery:
1. Hold the printer upright with one hand and press
the battery release button on the handle with your
other hand.
2. The battery compartment door opens slightly. Use
your finger to open the door.
3. Remove the battery.
4. Insert a new battery (label side up) into the
compartment (connector end last).
5. Close the compartment door until it clicks into place.
1-4 Equipment Manual
Accessories." The battery might explode if placed on a different
Classification: Avery Dennison – Public
Batter y Connec tor End