Scanning Documents With The Scansnap By Inserting Two Documents At A Time Or By Inserting The Next Document While The Current Document Is Being Scanned - Fujitsu ScanSnap ix100 Basic Operation Manual

Scanning Documents with the ScanSnap by Inserting Two Documents at a Time or by Inserting the Next Document While the Current
Scanning Documents with the ScanSnap by
Inserting Two Documents at a Time or by
Inserting the Next Document While the Current
Document Is Being Scanned
When scanning small size documents such as business cards and postcards with the ScanSnap,
you can insert two documents at a time or you can insert the next document while the current
document is being scanned. These scanning methods are referred to as dual scans.
Documents can be inserted in the following two methods:
l Inserting two documents at a time in the ScanSnap
l Inserting the next document while the current document is being scanned
For details about documents that can be scanned, refer to
ATTENTION
l When you select an option other than [Automatic detection] for [Paper size] in the [Paper] tab of the
"ScanSnap Setup Window" (page
l Use a dual scan to scan a document within the following ranges. If one of the following ranges is
exceeded, a length error occurs and part of the document may not appear in the scanned image.
- Maximum scanning length: 863 mm (34 in.) (355.6 mm (14 in.) when [Excellent] is specified for
[Image Quality] in the [Scanning] tab of the
- Maximum number of documents for scanning: 20 sheets
l When you continue scanning by inserting the next document while the current document is being
scanned, the [Scan/Stop] button flashes more quickly if the scanning length exceeds 650 mm (26
"Documents to Scan" (page
47), the dual scan function is disabled.
"ScanSnap Setup Window" (page
24
Document Is Being Scanned
67).
47))