Pmc Stream For Listen-In Using The Pmc Broadcaster Method - ASL INTERCOM MPS Series Configuration Manual

5.3.1

PMC Stream for Listen-in Using the PMC Broadcaster Method

Figure 17 Listen-in configuration – PMC broadcaster method (example using iPAM400)
MPS-Series – Configuration Guide
VIPA Device hosting the PMC
stream used for listen-in
Audio Device node:
Parameters: system default settings
Audio Input node:
•
•
•
PMC Device node:
•
Port=Port as configured for the listen-in button
•
Multicast Address=Multicast address as configured
for the listen-in button
•
Other parameters: system default
PMC Output node:
•
Type=Static
•
Audio Groups (Advanced Optional Settings): the user-
defined audio group assigned to the audio input
U-0664-0265.doc – Issue: 03 complete, approved
Page 53 of 60
Enabled
Audio Groups (Advanced Optional Setting): a user-
defined audio group
Other parameters: as required